Deadweight Tester / Pressure Balance
GB
LR-
Cal
LDW-H
Operating Instructions
LR-
Cal
LDW-H
5
1. General
.
1.1 General Instructions
.
In the following chapters detailed information on the
LR-
Cal
LDW-H
pressure balance (deadweight
tester) and its proper use can be found.
Should you require further information, or should there be problems which are not dealt within detail in
the operating instructions, please contact the address below:
DRUCK & TEMPERATUR Leitenberger GmbH
Bahnhofstr. 33
D-72138 Kirchentellinsfurt
Tel: +49- (0) 7121 – 9 09 20-0
Fax: +49-(0) 7121 – 9 09 20-99
E-Mail: [email protected]
www.lr-cal.net
If nothing to the contrary is agreed, the pressure balance is calibrated in compliance with the currently
valid body of international regulations and can be referred directly to a national standard.
The warranty period for the pressure balance is 24 months according to the general terms of supply of
ZVEI.
The guarantee is void if the appliance is put to improper use or if the operating instructions are not
observed or if an attempt is made to open the appliance or to release attachment parts or the tubing.
We also point out that the content of these operating instructions neither forms part of an earlier or
existing agreement, assurance or legal relationship nor is meant to change these. All obligations of
DRUCK & TEMPERATUR Leitenberger GmbH result from the respective sales contract and the
general business terms of DRUCK & TEMPERATUR Leitenberger GmbH.
LR-
Cal
is a trade mark DRUCK & TEMPERATUR Leitenberger GmbH.
Names of companies or products mentioned in this handbook are registered trade
marks of the manufacturer.
The devices described in this manual represent the latest state of the art in terms of their design,
dimension and materials. We reserve the right to make changes to or replace materials without any
obligation to give immediate notification.
Duplication of this manual in whole or in part is prohibited.
© 2015 Copyright DRUCK & TEMPERATUR Leitenberger GmbH. All rights reserved.
