13
The tilt angle (available on model Z-25 only) can be adjusted in two ways.
1. Lay the chair on its side to adjust
the rear telescopic support. Unlock
the
spring pull
by turning the
knob counterclockwise until it
won’t turn anymore (about 1 ½
turns), then pull.
2. Adjust the height as desired then
release the
pull
, ensuring that
it slides into a hole. IMPORTANT:
lock the
pull spring
by firmly turning
the knob clockwise.
The Z-55 Nomad and Z-25-28
Extra bariatric
models are equipped with
gas cylinders for adjustment with a user in the chair.
Only the three
starting positions at the base of the gas cylinder allow a variation in
the type of tilt.
TILT – MODEL Z-25
WARNING: THE CHAIR MUST BE UNOCCUPIED WHEN MAKING THIS
ADJUSTMENT.
3. For additional adjustment: rotate
the attachment of the locking pin
that attaches the telescopic support
behind the base of the chair. While
holding the telescopic support with
one hand, remove the locking pin.
Align the telescopic support with
one of the three holes available
in the base of the chair then re-
insert the locking pin and secure it
with the attachment.