LPT-3000 Remote User
’
s Guide
14
LP Technologies Tech Support
E-mail
, or Call
316-831-9696 Ext 0
2. Rear Panel
1
2
3
4
5
6
[Figure 3-2] Overview of the Rear Panel
1.
①
RF IN-1, IN-2, IN-3, and IN-4 Port
The LPT-3000R has a built in 4:1 switching option. Therefore this model can connect up to 4
signals on its back panel. Please see the inputs IN-1, IN-2, IN-3 and IN-4 as shown in the above
figure.
2.
RF IN/OUT Port
For an RF signal entering the RF IN-1 port, the RF IN/OUT port uses the internal RF power
divider and produces the output. In general, the output is produced with the loss of
approximately -6dB. General signals from the antenna port are measured as they enter RF IN-1
and are produced as outputs through the RF IN/OUT port.
3.
Ethernet interface
Communication is established between the PC and the LPT-3000R Spectrum Analyzer through
the RJ-45 connector using Remote TCP application software.