LIP-ME20X User Manual
21
LOYTEC
Version 7.2
LOYTEC electronics GmbH
press to enter a menu or go into selection mode. When in selection mode turn the jog dial to
alter the value and press again to quit the selection. Some input fields provide acceleration.
This means turning faster changes the value in larger increments.
To Set the IP Address on the LCD Display
1.
On the LCD main screen set the desired language. Navigate to the flag symbol, press
the button and choose the desired language.
2.
Navigate to the IP address on the main screen and press the button.
3.
There navigate to the needed input fields, press and change the value. Press again to set
the value. Continue to the next field.
4.
Finally navigate to
Save and reboot
and press.
5.
Acknowledge the reboot and the device reboots with the new IP address.
To Configure the BACnet Device ID over the LCD Display
1.
On the LCD main screen navigate to
Device Settings »»
.
2.
Then navigate to the menu
BACnet »»
.
3.
In that menu navigate to the
ID
input for entering the device ID. The field is split into
two controls, one for the thousands and one for singles, to simplify entering big
numbers.
4.
After the device ID has been entered the device name is automatically assembled using
that device ID, if no other name has been configured on the Web UI.
5.
On a BACnet router navigate to the
BAC/IP Net
menu item and enter the BACnet
network ID of the BACnet/IP network. Then choose the appropriate
MS/TP Net
number for each available MS/TP port. Note, that the network IDs must be unique in
the entire BACnet network. To disable the router port, scroll down till
off
appears.
6.
To let the changes take effect, the device needs to be rebooted. For doing this now you
may select the menu item
Save and reboot
.