L-Proxy User Manual
83
LOYTEC
Version 3.1
LOYTEC electronics GmbH
To Add a Device to LonMaker TE
1.
In your LonMaker drawing, drag a device stencil into the drawing. Enter an
appropriate name as shown in Figure 71.
Figure 71: Create a new device in the drawing.
2.
Select
Commission Device
if the L-Proxy is already connected to the network.
3.
In the
Device Template
group box select the existing device template of the L-Proxy.
Select “L-Proxy_V3_0_FT-10”, if the L-Proxy is configured to use the FT-10
interface, or “L-Proxy_V3_0_IP-10L”, if the L-Proxy is configured to be on the IP
channel. For information on how to configure which port to use, refer to Section 4.5
for the console UI or Section 5.2.4 for the Web UI.
4.
Select the channel, which the L-Proxy is connected to and click
Next
.
5.
The following dialog shown in Figure 72 appears, click
Next
.
Summary of Contents for L-Proxy
Page 1: ...L Proxy CEA 709 Gateway User Manual LOYTEC electronics GmbH ...
Page 10: ......
