manualshive.com logo in svg

LOYTEC L-Proxy, User Manual

Share
Download
LOYTEC L-Proxy User Manual Download Page 107

L-Proxy User Manual 

107 

LOYTEC  

Version 3.1 

 

LOYTEC electronics GmbH   

To Change the NV Allocation Type 

1.

 

In the data point view, select the NVs in the L-Proxy/CEA709 port folder, for which 
the NV allocation shall be changed. 

Tip! 

 By using Ctrl-A all NVs can be selected. 

2.

 

Select the 

NV allocation

 property as indicated by the red rectangle in Figure 108. 

3.

 

To make the data points static NVs on the L-Proxy, select 

Static NV

. 

 

 

Figure 108: Change the NV allocation type. 

7.9.9  Create Static NVs 

The L-Proxy can be configured to change its static interface and boot with a new one. 
Apart from creating static NVs from scanned or imported data points, static NVs can also 
be created manually in the L-Proxy/CEA-709 folder. 

To Create Static NVs Manually 

1.

 

Select the L-Proxy/CEA-709 Port/Datapoint folder 

 

2.

 

Right-click in the data point list and select 

New Datapoint…

 in the context menu. 

This opens the NV creation dialog as shown in Figure 109. 

Summary of Contents for L-Proxy























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands