112
Sterling
Owner’s Guide
• RETURN TIME
is the amount of time it takes for the Glide to return to normal tune.
• GO TIME
and
RETURN TIME
values range from from 0 (Fast takes almost no time) to 100 (Slow - takes a
long time).
To set the three values, press the name on the screen and then press either
SCROLL
button to reach the desired
value.
GLIDE SETTINGS
can be used to customize the Glide to your liking.
SUPER GLIDE
is a popular alternative
to
NORMAL GLIDE
and works well with the
HAWAIIAN GUITAR
sound on the Upper Keyboard.
Any Glide setting can be saved into a
BANK PRESET
. Pressing the
RESET
button or turning the organ off
will return the Glide Settings to the factory preset.
Press the lighted
FEATURE(CLEAR)
button to return to the
POWER-UP
screen.
2. Vibra-Trem
- SHORTCUT=ANY FLUTE VIBRA TREM BUTTON
VIBRA TREM
allows you to change the speed of the Vibra Trem feature. The Vibra Trem buttons are locat-
ed in the
ANIMATION
Section of the organ and are labeled
SLOW/FAST - LOWER
and
SLOW/FAST - UPPER
.
This feature does not affect the Pedal tabs.
Use the feature to customize the Vibra-Trem speed to your liking. Any changes can be saved into a
BANK
PRESET
. Pressing the
RESET
button or turning the organ off will return the Vibra Trem speeds to the facto-
ry settings.
Press the lighted
FEATURE(CLEAR)
button to return to the
POWER-UP
screen.
3. Portamento Time
- SHORTCUT=THE PORTAMENTO BUTTON
The
PORTAMENTO TIME
feature allows you control the speed of Portamento, which is the smooth glide effect
connecting one note to the next. The amount of glide time between notes can be made faster or
slower.
The Portamento effect may be turned on and off independently by pressing the on/off screen buttons.
Pressing a screen button that reads off will turn it on. Pressing a screen button that reads on will turn it off.
PORTAMENTO TIME
is preset from the factory and need not be
changed.
Pressing the words
PORTAMENTO TIME
on the screen displays the
Portamento time for Solo 1 and Solo 2 sounds. Remember, the Solo
1 sound is the Solo sound button that is lighted constantly. The Solo
2 sound is the Solo sound button that blinks on and off, when two
Solo sounds are used at the same time.
VIBRA TREM
speeds are factory preset and need not be changed.
Press the word
VIBRA-TREM
on the screen to display the factory set-
tings.
Press the Vibra Trem selection on the screen that you wish to change.
It will become highlighted. Press either
SCROLL
button to set the
desired speed. Vibra Trem speed value ranges from 1 (slowest) to 100
(fastest).
