Lowrey EZP3 EASY Piano, Owner'S Manual, Page: 34 / 59

Lowrey EZP3 EASY Piano
34
3. Press the Touch or Transpose button to exit Tuning setting mode. The buttons will stop flashing.
While adjusting the tuning settings, the currently select sound will be heard when pressing a key on the
keyboard.
To use a different sound while adjusting the Tuning settings, first exit the tuning mode, select the
desired sound, then repeat Step 1 and Step 2.
- Any changes made to the Tuning setting will remain until the power is turned off.
- When the power is turned off, the Tuning setting will return to the default value of ‘44.0’.
- It is possible to store a preferred tuning value for power on. See page 48, Memory Backup.
Damper Effect
When the damper pedal is depressed on an acoustic piano, all dampers are lifted up, allowing the
strings to vibrate freely. When a note or chord is played on the piano with the damper pedal depressed,
not only will the strings of the notes played vibrate, but also the strings of other notes, vibrating in sym-
pathetic resonance. The Damper Effect function of the EZP3 simulates this phenomenon.
1. Press and hold the Touch and Transpose buttons.
Press and release the Voicing button. Release Touch and Transpose.
Voicing
The buttons will start to flash, indicating that the Damper Effect
function has been selected.
The name of the function ‘dEF’ (Damper Effect) and the current
settings will be shown in the display.
2. Press the
q
or
p
Value/Balance buttons
to increase or decrease the Damper Effect
level to the desired value.
Damper Effect
• • •
Off 1 10
The Damper Effect value can be set within the range of 1 to 10. Setting the Damper Effect to ‘Off’ will
disable the function entirely.
A Damper Effect value of ‘1’ produces a very subtle effect, while the maximum level of ‘10’ creates a
stronger, more pronounced resonance.
3. Press the Touch or Transpose button to exit Damper Effect setting mode.
The buttons will stop flashing.
- Any changes made to the Damper Effect setting will remain until the power is turned off.
- When the power is turned off, the Damper Effect setting will return to the default value of ‘5’.
- It is possible to store a preferred Damper Effect value for power on. See page 48, Memory Backup.