Lowrance X510C, Operation Instructions Manual

Page: 92 / 128

86
4. Press
EXIT
repeatedly to return to the sonar display.
To set Depth units:
1. Press
MENU
|
MENU
, highlight
U
NITS OF
M
EASURE
and press
ENT
.
2. Highlight
D
EPTH
and press
ENT
.
3. Use ↑ ↓ to select one of the following options: Feet, Fathoms or Me-
ters. Press
ENT
.
4. Press
EXIT
repeatedly to return to the sonar display.
To set Volume units:
1. Press
MENU
|
MENU
, highlight
U
NITS OF
M
EASURE
and press
ENT
.
2. Highlight
V
OLUME
and press
ENT
.
3. Use ↑ ↓ to select one of the following options: Gallons or Liters. Press
ENT
.
4. Press
EXIT
repeatedly to return to the sonar display.
To set Heading units:
1. Press
MENU
|
MENU
, highlight
U
NITS OF
M
EASURE
and press
ENT
.
2. Highlight
H
EADING
and press
ENT
.
3. Use ↑ ↓ to select one of the following options: True or Magnetic.
Press
ENT
.
4. Press
EXIT
repeatedly to return to the sonar display.
Upper and Lower Limits
See the entry in this section for Depth Range - Upper and Lower Limits
Zoom & Zoom Bar
Zooming in the display is a common, fast and easy method used to en-
large small detail, fish signals and bottom structure. This unit lets you
zoom in quickly and easily by pressing the Zoom In key,
ZIN
.
Pressing
ZIN
once doubles the size (2X) of all echoes on the screen.
Pressing it again quadruples the size of the echoes (4X). The blue zoom
bar on the far right side of the screen shows which echoes will be dis-
played on the screen when the
ZIN
key is pressed.
Pressing the
ZIN
key once will enable a 2X zoom which will show all
echoes that are between the top and bottom of the 2X zoom bar. Press-
ing the key again will give a 4X zoom and only the echoes between the
top and bottom of the 4X bar will be displayed.
Press the Zoom Out key,
ZOUT
, to return the display to the normal mode.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de