background image

11

LOWRANCE ELECTRONICS

FULL ONE-YEAR WARRANTY

"We," "our," or "us" refers to LOWRANCE ELECTRONICS, INC., the manufacturer of this
product. "You" or "your" refers to the first person who purchases this product as a consumer
item for personal, family or household use.

We warrant this product against defects or malfunctions in materials and workmanship,
and against failure to conform to this product's written specifications, all for one (1) year
from the date of original purchase by you. WE MAKE NO OTHER EXPRESS WARRANTY
OR REPRESENTATION OF ANY KIND WHATSOEVER CONCERNING THIS PROD-
UCT. Your remedies under this warranty will be available so long as you can show in a
reasonable manner that any defect or malfunction in materials or workmanship, or any
non-conformity with the product's written specifications, occurred within one year from the
date of your original purchase, which must be substantiated by a dated sales receipt or
sales slip. Any such defect, malfunction, or non-conformity which occurs within one year
from your original purchase date will either be repaired without charge or be replaced with
a new product identical or reasonably equivalent to this product, at our option, within a
reasonable time after our receipt of the product. If such defect, malfunction, or non-
conformity remains after a reasonable number of attempts to repair by us, you may elect to
obtain without charge a replacement of the product or a refund for the product. THIS RE-
PAIR, OR REPLACEMENT OR REFUND (AS JUST DESCRIBED) IS THE EXCLUSIVE
REMEDY AVAILABLE TO YOU AGAINST US FOR ANY DEFECT, MALFUNCTION, OR
NON-CONFORMITY CONCERNING THE PRODUCT OR FOR ANY LOSS OR DAMAGE
RESULTING FROM ANY OTHER CAUSE WHATSOEVER. WE WILL NOT UNDER ANY
CIRCUMSTANCES BE LIABLE TO ANYONE FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR OTHER INDIRECT DAMAGE OF ANY KIND.

Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you.

This warranty does NOT apply in the following circumstances: (1) when the product has
been serviced or repaired by anyone other than us; (2) when the product has been con-
nected, installed, combined, altered, adjusted, or handled in a manner other than according
to the instructions furnished with the product; (3) when any serial number has been ef-
faced, altered, or removed; or (4) when any defect, problem, loss, or damage has resulted
from any accident, misuse, negligence, or carelessness, or from any failure to provide rea-
sonable and necessary maintenance in accordance with the instructions of the owner's
manual for the product.

We reserve the right to make changes or improvements in our products from time to time
without incurring the obligation to install such improvements or changes on equipment or
items previously manufactured.

This warranty gives you specific legal rights and you may also have other rights which may
vary from state to state.

REMINDER: You must retain the sales slip or sales receipt proving the date of your origi-
nal purchase in case warranty service is ever required.

LOWRANCE ELECTRONICS

12000 E. SKELLY DRIVE, TULSA, OK 74128

(800) 324-1356

Summary of Contents for LST-3800













Reviews: