5
Caution:
The bare ends on any unused wires could cause an electrical short
if left exposed. To prevent this, you should cover the individual
wire ends — either by capping them with wire nuts or wrapping
them with electrical tape. You should cut off the bare wire before
taping off the ends.
After connecting the power wires to the battery or switch, connect the
power/transducer cable to the gauge's power cable (above).
The unit won't be harmed if the power wires are connected backwards,
but it won't work until they are connected correctly.
NOTE
The LST-3800 comes with a 200 kHz transducer. For installation in-
structions, download
Installation Instructions for Skimmer Transduc-
ers
from the Lowrance web site, www.lowrance.com. part number,
988-0147-582, at www.lowrance.com.
Operation
The displays and settings in this digital gauge are controlled by a three-
button keypad. The buttons are
MENU
,
UP
and
DOWN
. The
MENU
key
takes you to the gauge's main menu, allows you to access other internal
menus and is used to modify menu options. The
UP
and
DOWN
buttons
allow you to scroll through all menus.
LST-3800 keypad.
Summary of Contents for LST-3800
Page 10: ...10 Notes ...
