manualshive.com logo in svg

Lowrance Hook Reveal Series, Operator'S Manual

The Lowrance Hook Reveal Series is a cutting-edge fishfinder that provides advanced sonar technology for an unparalleled fishing experience. To fully unleash its potential, make sure to download the Operator's Manual for free from our website, where you can find step-by-step instructions and insightful tips on optimizing performance.

Share
Download
background image

Trails

Trails are a graphical presentation of the historical path of the vessel,
allowing you to retrace where you have travelled.
Trails can be converted to routes from the Edit Trails dialog. Refer to

"Converting trails to routes"

 on page 33.

From the factory, the system is set to automatically track and draw
the vessel's movement on the panel. The system continues to
record the trail until the length reaches the maximum points, and
then automatically begins overwriting the oldest points.
The automatic tracking function (record) can be turned off from the
Edit Trails dialog.

34

Waypoints, routes, and trails

 | Hook Reveal X Series

Operator Manual

Summary of Contents for Hook Reveal Series















































































Reviews:

No comments

Related manuals for Hook Reveal Series

Furuno CSH-5LMARK-2 Installation Manual preview
CSH-5LMARK-2
Brand: Furuno Pages: 86
Eagle Z 7200 LIQUID CRYSTAL GRAPH Installation And Operation Manual preview
Z 7200 LIQUID CRYSTAL GRAPH
Brand: Eagle Pages: 20
Wassp WMB-3230 Operator'S Manual preview
WMB-3230
Brand: Wassp Pages: 76

Brands by name

Popular brands

Load more brands