Lowrance GlobalNav 310, Installation And Operation Instructions Manual

Page: 30 / 65

26
Highlight the “Save Position As” label as shown below left and press the
right arrow key when you’re at the location you wish to save. This saves
your present position under the waypoint number you selected on the
first page.
Saving Cursor Position as a Waypoint
(Select Number Method)
To save the cursor position under a specific waypoint number, first posi-
tion the cursor at the desired position. Then follow the previous instruc-
tions for saving your present position as a waypoint using the select num-
ber method. Remember, the
method of saving your present position and
the cursor’s position is identical.
Edit Lat/Lon
The GlobalNav 310 lets you enter any
latitude/longitude using the keyboard
and save it under any waypoint number,
from 1 to 250. You can also change any
waypoint’s position using this method. To
do this, first select the waypoint number
that you want to save a position under
from the waypoint menu. In this ex-
ample, we’ll use waypoint number 10.
Next, highlight the “WPT-Options” menu
and press the right arrow key. Now highlight the “Edit Lat-Lon” menu and
press the right arrow key. The screen shown above appears. Using the
left and right arrow keys, highlight each number in the position and change
it using the up and down arrow keys. When you’re ready to save this
position and return to the waypoint screen, press the ENT key. The loca-
tion you entered shows at the bottom of the screen under the waypoint
number you selected. Note: You can also use this method to change the
position of an existing waypoint.