manualshive.com logo in svg

Lowrance GlobalMap 3300C, Installation And Operation Instructions Manual, Page: 30 / 140

Share
Download
Lowrance GlobalMap 3300C Installation And Operation Instructions Manual Download Page 30

24

place against the side of the hole. Finally, fasten the bracket to the
dash. Attach the unit to the gimbal bracket using the supplied gimbal
knobs and washers.

In-Dash Installation

You can mount the unit in the dash with an optional FM-5 In-Dash
Adapter Kit. The kit includes mounting hardware, a template for cut-
ting the hole and an instruction sheet, part 988-0147-43.

              

In-dash mounting template for GlobalMap 3300C GPS unit, showing

dimensions. NOTE: The figure above is 

not

 printed to scale. A scaled

template (FM-5 In-Dash Adapter Kit instructions) is available for free

download from our web site, www.lowrance.com.

MMC or SD Card Memory Card Installation

Your unit uses a MultiMedia Card to store information, such as custom
maps, waypoints, trails and other GPS data. The unit can also use Se-
cure Digital Cards (SD card) to store data.

NOTE:

Throughout this manual, we will use the term MMC, but just re-
member that your unit can use an MMC 

or

 SD card to store data.

Both of these solid-state flash memory devices are about the size of a
postage stamp. An SD card is slightly thicker than an MMC. As this
manual went to press, MMCs were available in storage capacities of 8
MB, 16 MB, 32 MB, 64 MB and 128 MB. SD cards were available in
capacities of 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB and higher.

113.5
[4.46]

Millimeters

[Inches]

ALWAYS VERIFY DIMENSIONS

In-Dash

Template

R 7.9
[0.31]

146.5
[5.76]

Top

Summary of Contents for GlobalMap 3300C













































































































































Reviews:

No comments