49
pears, connecting your
current
position to the cursor's location. Press
ENT
to set the first point and the rubber band line disappears.
3. Move the cursor to the second position. The rubber band line reap-
pears, connecting the first point you set to the cursor. The distance
along that line will appear in the lower right-hand corner of the screen.
4. Press
EXIT
|
EXIT
to return to the main page display.
Find Your Current Position
When you turn on the iFINDER, it automatically searches for satellites
and under clear sky conditions, calculates its position in approximately
one minute or less.
NOTE:
Clear sky means open sky, unobstructed by terrain, dense foliage or
structures. Clouds do not restrict GPS signal reception.
If for some reason satellite acquisition takes longer, you may be inside
a structure or vehicle or in terrain that is blocking signal reception. To
correct this, be sure you are positioned so the unit has as clear a view of
the sky as possible, then turn the unit off and back on again.
If the cursor is activated, any information the unit gives you will be
based on the cursor position, not your own. If you want to find where
you are, just press
EXIT
until the cursor disappears and the map snaps
back to your position.
Icons
Icons are graphic symbols used to mark some location, personal point of
interest or event. They can be placed on the map screen, saved and re-
called later for navigation purposes. These are sometimes referred to as
event marker icons. The iFINDER has 42 different symbols to choose
from when creating an icon.
Icons are similar to waypoints, but they do not store as much informa-
tion and you can not use a menu to navigate to icons as with waypoints.
But, you
can
use the map cursor and navigate to any icon on the map.
You can create an icon at the cursor position on the map or at your cur-
rent position, while you are navigating.
Create Icon on Map
1. Move the cursor to a place where you want an icon.
2. Press and
hold
ENT
until the screen displays Save Icon, then
release
the
ENT
key. The Select Symbol menu will appear.
3. Select an icon, then press
ENT
. The icon appears on the map.
www.Busse-Yachtshop.de email: [email protected]
Summary of Contents for Finder Expedition C
Page 18: ...10 Notes www Busse Yachtshop de email info busse yachtshop de...
Page 78: ...70 Notes www Busse Yachtshop de email info busse yachtshop de...
Page 112: ...104 Notes www Busse Yachtshop de email info busse yachtshop de...
Page 138: ...130 Notes www Busse Yachtshop de email info busse yachtshop de...
