Lowrance Elite-5 DSI Operation Manual Download Page 13

Page: 13 / 64

Basic Operation |

Elite series

Basic Operation |

Elite series

Press the

PWR/LIGHT

key to access the Backlight

dialog.

Restore defaults

Resets unit options and settings

to defaults.

Advanced Mode

Enables advanced features and settings.
The following features are enabled when Advanced

mode is turned on:

• Navigation (Enables arrival radius, off-

course distance and Bearings setting)

• Alarms (Enables arrival, off course and

anchor alarm options)

•  NMEA 0183 Output
•  NMEA 2000 (Elite-7 and Elite-9 only)
•   Units (Enables distance, speed, depth,

temperature, and bearings options)

Standby mode

Lowers power consumption by

turning off sonar and the display.

NOTE

Leaving your unit in Standby

mode when your boat is not is use will run

down your battery.

Summary of Contents for Elite-5 DSI

































































Search results

Summary of Contents for Elite-5 DSI

Reviews:

Related manuals for Elite-5 DSI

Brands by name

Popular brands

Lowrance Elite-5 DSI, Operation Manual

Search results

Summary of Contents for Elite-5 DSI

Reviews:

Related manuals for Elite-5 DSI

Brands by name

Popular brands