14
Use
→
How to connect the high-fl ow device
Connect the high-fl ow device to the mains.
→
Set parameters
Do not change the parameters without the doctor's instruction and
supervision. You can skip this chapter if the high-fl ow device is to
continue to operate with the last settings.
You cannot change the parameters if is displayed in the upper right
corner of the settings interface.
Only if
is displayed, can you change the parameters and make
changes to the system confi guration.
Parameter setting
LM Flow
Press the menu button to select
the fl ow and temperature via the
encoder.
Set the parameters with the
encoder.
Set the desired oxygen concen-
tration at the oxygen source. (Not
applicable if no additional oxygen
is required)
Press the Start/Stop button for 3
seconds to start therapy.
Adjust the nasal cannula.