20
• Calibration:
1-point calibration with conductivity
solution in the range from
1000...2000µS/cm
• Nominal temperature:
25°C
• Operating temperature:
unit:
0 to +50°C
measuring cell:
-5 to 80°C (short-term to 100°C)
• Memory:
Measured values are
stored for the
ranges „conductivity“, „resistivity“,
„TDS“ and „salinity“ together with the
temperature at which the value
occurred
• Power supply:
4 x 1.5V batteries, type AA, operating
life up to >1500h (depending on measu-
ring
mode)
• Power consumption:
ca. 2.0 mA, max. 4.2 mA
at 199.9 mS/cm
• Battery change
indicator:
‚bAt‘
• Automatic „Off“
function:
if no key is pressed and no data
transfer transfer is occurring, the unit
switches off after the switch-off delay
time. May be set between 1 and 120
minutes or inactive.
Summary of Contents for SensoDirect Con200
Page 1: ...GB SensoDirect Con200 Conductivity TDS Salinity Meter Operating instructions ...
Page 22: ...22 ...
Page 23: ...23 ...
