Lovibond SensoDirect Con200, Operating Instructions Manual

Page: 10 / 24

10
8. Configuration of the unit
To configure the unit, press the [Menu] key.
The first menu item appears.
If you press the [Menu] key again, the display jumps
to the next menu item.
You can set the various parameters using the [ ] [ ]
keys.
Press the [Store] key to store and conclude configu-
ration.
The unit then switches back to measuring mode.
You can terminate the configuration process by pres-
sing the [Meas] or [Hold] key.
Settings made up to this point are not stored.
The unit retains the previous settings.
8.1 ‘Unit’: Selection of the display
mode
SAL:
Salinity
mg/l:
TDS
kOhm: Specific Resistance
mS/µS:
Conductivity
8.2 ‘Auto Range’: automatic range
selection in Conductivity measuring
mode
off:
the range is entered manually ([ ] or [ ] keys )
on: the most suitable range is automatically set by
the unit
+
µS
kOhm mS
SAL mg/l