Louvolite Vision 32 Open Cassette Fitting & Operating Instructions Download Page 6

Page: 6 / 8

fig. 11

fig. 12

Split the cord tidy (fig. 7) and mark the remaining offset hole position

(fig. 8) before drilling and plugging both location holes if necessary (fig. 9).

Screw into the offset hole to fix the back piece of the cord tidy to the wall

(fig. 10).

Re-assemble the cord tidy with the chain (fig. 11) and fix it in previously marked

position (fig. 6 with a screw through the centre hole (fig. 12).

fig. 7

fig. 8

fig. 9

fig. 10

Summary of Contents for Vision 32 Open Cassette

Page 1: ...Vision 32 40 Open Cassette Fitting Operating Instructions Louvolite Customer Services Tel 0161 882 5050 Email sales louvolite com www louvolite com ...

Page 5: ...t the disposable red tab fig 5 Position the cord tidy to the wall at the furthest distance below the roller tube adding appropriate tension to the chain and mark its location fig 6 fig 3 fig 4 fig 5 fig 6 Disposable retaining thrust washer Disposable red tab Disposable red tab Cord tidy ...

Page 6: ...ing and plugging both location holes if necessary fig 9 Screw into the offset hole to fix the back piece of the cord tidy to the wall fig 10 Re assemble the cord tidy with the chain fig 11 and fix it in previously marked position fig 6 with a screw through the centre hole fig 12 fig 7 fig 8 fig 9 fig 10 ...

Page 7: ...the front chain downwards with a smooth and steady pressure and to raise use the rear chain For a conventional rolled blind to lower the blind pull the rearmost length of chain downward To roll the blind up do the same on the front length of chain NOTE TO INSTALLER Please ensure a general child safety warning tag is fitted on the product fig 13 Cover cap ...