background image

SXXXXXX 02357

WARNING

Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product.
To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become 
wrapped around a child’s neck. Move beds, cots and furniture away from window covering cords.
Do not tie cords together. Make sure cords do not twist and create a loop. 

Scan this with your smartphone to view Louvolite training videos

Child Safety - EN 13120 Guidelines for Vision Blinds

If fixing height is unknown

Cannot be manufactured - the fixing 
height must be known to be able to 
use the Vision

®

 breakaway system.

If fixing height known

The distance between floor and 
bottom of chain must be greater 
than 0.6 metres.

Chain must be fitted with 2 x 

Easybreak connectors 200mm apart

Will break apart when excessive 
force is exerted on the chain.

If fixing height is unknown

-  Blind drop ≤ 2.5 metres, the 

chain length must be ≤ 1 metre.

-  Blind drop > 2.5 metres, the 

chain length must be drop of 
blind minus 1.5 metres.

If fixing height known

All blind drop sizes, distance 
between floor and bottom of chain 
must be greater than 1.5 metres.

Cord tidy

Affix cord tidy to wall at the 
maximum distance possible from 
the blind control mechanism 
ensuring all operating cords are 
taut (chain no more than 50mm 
apart at entry/exit of cord tidy).

Breakaway Connector System

Floor

Distance between 

chain & floor

Fixing height

known

Chain with 2 x 

Easybreak connectors 

spaced 200mm apart

2

3

1

Tensioned System with Cord Tidy

Floor

Distance between 

chain & floor

Blind drop 

size

Fixing height

Chain 

length

Cord tidy

2

3

1

NOTE TO INSTALLER:

 Please ensure general child safety warning tag is fitted on the product.

1

2

3

1

2

3

Summary of Contents for Vision 32 Open Cassette









Reviews: