background image

 

Seite 5 / 10 

 

 

Operating Instructions 
LTS 138 b + LTS 150 b 

4.   Operating the Transfer Press 

This transfer press can be used for transferring thermal weldable materials onto any 

kind of textiles.  

Not more than one person may operate the press at a time. Avoid exceeding the spec-

ified maximum temperature when operating the press.  

Lotus Press is not liable for faults, accidents, damages, losses etc. resulting from not 

following the instructions in this manual.  

Note: It is strictly forbidden to operate or mount this transfer press contrary to the di-

rections made in this manual.  

 

5.   Safety Regulations 

Before operating the transfer press, the operator must have fully understood the han-

dling and function of the electric components of this transfer press and must have read 

and grasped all information provided in this manual.  

NOTE: There is the risk of getting burned if you touch the heating plates during 

operation. We strongly advise the operator to wear protective gloves providing 

protection up to a temperature of 250° C.  

Avoid touching the heating plates of the transfer press during operation and for a peri-

od of 15 minutes after the press has been switched off, as the operating temperature 

of the press is very high. Please also avoid touching the lower supporting plates when 

closing the press or printing the textile, as these operations involve a risk of getting 

squashed and burned.  

It is strongly recommended that only one person operates the transfer press. 

Any kind of maintenance and / or repair work on the transfer press must only be per-

formed after the heating plate has been switched off and has cooled down to ambient 

temperature. 

Do not use the transfer press in a humid or wet environment. Before swapping 

the heating plates, switch off the unit and allow it to cool down to ambient tem-

perature. 

Do not perform any transfers to textiles containing solvents, flammable liquids, gase-

ous or liquid fuels. 

Unauthorised changes of the unit or the replacement of parts without consent of 

Lotus Press s.r.l. are prohibited. 

Summary of Contents for LTS 138











Reviews: