Lotus FT 712ET Series, Instructions For Installation And Use Manual

Page: 30 / 42

20
GB IE
TECHNICAL DATA TABLE
MODELS FT...-74ET... FT...-76ET... FT...-78ET... FT...-712ET... FTC-74ET FTC-78ET
DIMENSIONS cm
40x70x90h 60x70x90h 80x70x90h 120x70x90h 40x70x90h 80x70x90h
POWER SUPPLY
400V~3N
50/60Hz
400V~3N
50/60Hz
400V~3N
50/60Hz
400V~3N
50/60Hz
400V~3N
50/60Hz
400V~3N
50/60Hz
MAXIMUM ABSORPTION
8,01 16,09 16,02 32,04 3,9 7,8
MAXIMUM POWER
5,55 7,4 11,1 14,8 2,7 5,4
POWER SUPPLY CABLE
(Silicone)
5x1 mm² 5x2,5 mm² 5x2,5 mm² 5x6 mm² 5x1 mm² 5x1 mm²
MODELS FT...T-74ET... FT...T-76ET... FT...T-78ET... FT...T-712ET... FTCT-74ET FTCT-78ET
DIMENSIONS cm
40x70x29h 60x70x29h 80x70x29h 120x70x29h 40x70x29h 80x70x29h
POWER SUPPLY
400V~3N
50/60Hz
400V~3N
50/60Hz
400V~3N
50/60Hz
400V~3N
50/60Hz
400V~3N
50/60Hz
400V~3N
50/60Hz
MAXIMUM ABSORPTION
8,01 16,09 16,02 32,04 3,9 7,8
MAXIMUM POWER
5,55 7,4 11,1 14,8 2,7 5,4
POWER SUPPLY CABLE
(Silicone)
5x1 mm² 5x2,5 mm² 5x2,5 mm² 5x6 mm² 5x1 mm² 5x1 mm²
TRANSFORMATION
MODELLI
FT...-74ET...
FT...T-74ET...
FT...-78ET...
FT...T-78ET...
FTC-74ET
FTCT-74ET
FTC-78ET
FTCT-78ET
POWER SUPPLY 230V~3 50/60Hz 230V~3 50/60Hz 230V~3 50/60Hz 230V~3 50/60Hz
MAXIMUM ABSORPTION
13,94 27,86 6,78 A 13,56 A
MAXIMUM POWER
5,55 11,1 2,7 kW 5,4 kW
POWER SUPPLY CABLE
(Silicone)
4x1,5 mm² 4x4 mm² 4x1 mm² 4x2,5 mm²
MODELLI
FTC-74ET
FTCT-74ET
FTC-78ET
FTCT-78ET
POWER SUPPLY 230V~50/60Hz 230V~50/60Hz
MAXIMUM ABSORPTION
11,74 A 23,48 A
MAXIMUM POWER
2,7 kW 5,4 kW
POWER SUPPLY CABLE
(Silicone)
3x1,5 mm² 3x2,5 mm²
INSTRUCTIONS FOR INSTALLATION
The data plate is on the front panel (see diagram in electric connection item) and has all the data necessary for the
connection.
INSTALLATION
When fitting, the appliance must be levelled using a spirit level; slight differences of level can be adjusted by screwing
or unscrewing the adjustable feet. The main switch or the socket must be near the appliance and easily accessible.
It is advisable to place the appliance under an extractor hood so that steam is extracted rapidly. If the appliance is placed
near walls, dividing panels, kitchen furniture, decorative finishings, etc. , these should be in flameproof material;
otherwise it is necessary to cover them with non-flammable material.
Above all, it is necessary to ensure that the fire prevention norms are observed.
The installation, starting up and maintenance of the appliance must be carried out by qualified personnel. All operations
done when installing must be carried out observing the norms in force.
The manufacturer declines all responsibility in the event of incorrect functioning due to wrong installation or
installation which does not comply with the norms.
Attention! In accordance with international rules, when connecting the appliance, an automatic device enabling the
disconnection of all contacts from the mains, must be installed above it; this device must have a contacts opening of at
least 3 mm.