Jockey seat attachment
1 Open seat frame and slide front tubes into
housing.
2 Push firmly until spring button locks.
Push and lock mouldings at end of tubes into the housing on the
pushchair frame
2
1
Firmly fasten the strap at the front of
the seat to the ‘D’ ring under the foot-
plate.
Harness ‘D’ rings are fitted at the ends
of each waist strap for the attachment
of an additional harness complying with
BS6684
Squeeze prongs to
release harness
Push together to
lock
Move slides to ad-
just length of straps
DO NOT USE THIS SEAT
WITHOUT HARNESSING
YOUR CHILD INTO IT. If the
pushchair stops suddenly and
your child is not strapped in
he or she can easily fall out.
To remove seat undo
Front strap, then press
in ‘tongue
Press in but-
ton on tube
to release
front legs.
