Handle Adjustment
1 Press in outer buttons with both hands, push
handle up or down (just a short way) and hold
position (pressure)
2 Release right hand side (keeping the pressure
on left side).
3 Press middle button, handle locks will now be
released, adjust handle up or down to next lock
position.
Bumper Bar
Push bumper bars into slots.
To release. Press in ‘tongue’ in bumper
moulding and pull out of slot. If ‘tongue
cannot be felt through fabric either go un-
derneath fabric from outside of Jogger or
pull fabric down around slot..
Adjust bumper position by pushing in red
buttons.
IMPORTANT
Use the red plastic stoppers in the moulding's when they
are open and not being used by the jockey seat or the bumper bars. This
is to avoid children getting their fingers stuck inside.
Brake operation
Press outer end of red
lever to operate brakes,
and inner end to release
Swivel Adjustment
Select swivel or lock as desired.
To remove swivel wheels turn knob to
The spot press in and hold the white
button, pull off wheel.
