For Stick/Arc/MMA Welding:
1. Wear our auto darkening welding helmet and gloves to protect your eyes and hands from any
harmful welding arc. (Please see step 1 in Plasma Cutting.)
2. You don’t need to connect the machine to any gas or air supply. It’s a plug and play.
Panel connection instructions:
- Set TIG Weld/Stick Weld/Plasma Cut to Stick Weld mode (refer to Figure 1.4, page 2).
- Set “2.5S/5S” to “2.5S” mode.
- Set “Machine/PEDAL” to “Machine” mode.
- Adjust current dial between 10 and 200 amps (Figure 1.11).
Stick
Welding
Clamp
Ground
Cable
Figure 1.12
Please be sure to turn off the machine when you switch from one function to another.
This is important, because otherwise the machine could be damaged.
All accessories and consumables can be purchased at www.uwelding.com or Lotos’s authorized
resellers.
Thank you for your business!