General
Model Name
LTPDC2000D
Functions
50 A Pilot Arc Plasma Cutter
200 A TIG Welder
200 A Aluminum STICK Welder
Dimension with handle
LxWxH
17’’x 8’’x 14’’
Weight
33 lbs (15 kg)
Input voltage
110-220 V, 1-PH, 50/60 Hz
Power supply type
Inverter- IGBT
Accessories
Pilot Arc Plasma Cutting Torch
60 A
13.3 ft. (4m)
TIG welding torch
200 A
12.9 ft. (3.93m)
Arc/Stick clamp
200 A
6.5 ft. (1.98m)
Argon regulator
0-250 psi
Air regulator
0-150 psi
Rated input current
110-220 V, 1-PH, 27 A
Output current
10-50 A
Maintenance
Exposure to extremely dusty, damp, or corrosive air is damaging to this welding & cutting machine.
In order to prevent any possible failure or fault of this equipment, clean the dust out at regular intervals
with clean and dry compressed air of required pressure.
Please note: Lack of maintenance can lead to the unavailability and cancellation of the guarantee; the
guarantee of this welding and cutting equipment will no longer be available if attempts have been made to
take the machine apart or the factory-made sealing of the machine has been opened.
Troubleshooting
The following trouble shooting guide is for your reference only. Lotos Technology will NOT take any liability
or responsibility for any injury or damage caused in such action(s). Always turn off electrical power and air
supply before performing inspection and reconnection.
CAUTIONS: Only qualified technicians are authorized to undertake the repair of this equipment in the case of
machine failure.
20