MAINTENANCE
Remove dust by using compressed air regularly. If plasma cutter is placed in environment
where condition is polluted with smoke and dust, the plasma cutter must have dust removed
every day.
Pressure is adequate to cutting in order to protect smaller components.
Check the electric connectors and make sure the connectors are connected firmly (specially
connect and insert components), tighten the connectors.
Avoid water getting into machine and prevent machine becoming damp, or the machine
must be dried in time and measured insulation by meter. After there is no problem, the
machine can be operated.
If the machine will not be used for a long time, it should be put in its own packing box and
store in dry environment.
