SYSTEM OPERATION
AUTO AND MANUAL VIEWING OPTIONS
This system is preset to the Manual mode. In Auto mode, the LED light will
turn ON.
To manually view a specific camera location, set the system to Manual and
press the Ch. Select key to view the desired camera location. Auto Mode is
used when more than 1 camera is connected to the system.
Set the Auto/Manual button to Auto Mode in order to have the system
automatically rotate between camera locations.
SELECTABLE DWELL SETTING
Dwell Setting is the time duration between each camera view in the auto
sequence mode
This system provides you with three selectable dwell options (2, 5 and 10
seconds) when the system is set to Auto Mode. This system is preset to a 2
second selection.
Changing Dwell Time
1. Press and hold the CH Select button. The LED button will turn on to
indicate that it is set to 2 seconds.
2. Continue to press and hold the CH Select button. The LED button will flash
at a one second interval to indicate that it is now set to the 5 second
setting.
3. Continue to press and hold the CH Select button. The LED button will flash
three times to indicate it is set to the 10 second setting.
9
