Remote Control
Listed below is a quick reference for the Remote Control.
CHANNEL BUTTONS
-
Press to select a
specific camera by
number
RETURN BUTTON
-
Returns to the previous
selection in Menu Mode.
Exits the Menu Setup
when in the Main Menu.
DISP BUTTON
-
Changes the Screen
Mode to Single, Quad, 6
or 8 camera views.
SEQUENCE
-
Turns camera
Sequence Mode ON/
OFF.
POWER BUTTON
-
Turns the system power
ON/OFF
SETUP BUTTON
-
Opens the Main Menu
(system setup)
ENTER BUTTON
-
Applies a configuration
change in Menu Mode.
SEARCH BUTTON
-
Enters the Search
Menu.
ZOOM
-
Zooms in on the current
image
NAVIGATION AND
PLAYBACK
-
Controls the playback of
video.
Navigates in MENU and
SEARCH mode.
Adjusts the zoomed
area in ZOOM mode.
NOTE:
All Buttons described above function the same as the Front Panel buttons - see pages
10-13 of the Observation System Manual for detailed information. Buttons without descriptions do
not provide functionality to this unit.
REMOTE ID*
-
Configure when using
multiple systems.*
* If the REMOTE ID button is set incorrectly, the remote will not function. To reset the
Remote ID (when using only one system), Press the ID button, and then select the number
1. Press ENTER to reset the remote, and press RETURN to exit the ID Screen.
AUDIO SELECT -
Press to select an audio
channel. Press the
Audio select button,
then a channel 1~4.
VOLUME -
PTZ
-
Controls PTZ Cameras
