Lorex SG17L7584, Instruction Manual

Page: 26 / 49

26
Alarm Set
Alarm Set
1. ALARM - Configures the ALARM type for an alarm
event. Navigate by pressing the
K
and
L
buttons
to highlight, and press the OK button to switch
between DISPLAY modes:
• OFF - Alarm function is turned OFF
• OSD (On Screen Display) - When the alarm
occurs, the OSD displays [AL] in the
corresponding screen location.
• OSD + BUZZER - When an Alarm occurs, the
OSD [AL] appears on the corresponding
screen location, and a Buzzer will sound for the
set alarm period.
2. CH1 - CH8 - Set the alarm mode for cameras 1
through 8.
• Change the Alarm Interval - Navigate by
pressing the
K
and
L
buttons to highlight the
number of seconds, and press the OK button
to select. Use the
K
and
L
buttons to change
the number of seconds for alarm display, and
press the
OK button to accept the change.
• Press the
I
and
J
buttons to highlight the alarm
type OK button to change between alarm
modes. Alarm Modes include OFF (no alarm),
N/O (Normally Open) and N/C (Normally
Closed). Press OK to accept the change.
NOTE: This N/O N/C Setting is for the external
alarm input terminal ONLY, and will not affect the
PIR cameras offered by Lorex.
3. RETURN - Return to the MAIN MENU . Navigate
by pressing the
K
and
L
buttons to highlight, and
press the OK button to select
4. EXIT - Return to the camera view. Navigate by
pressing the
K
and
L
buttons to highlight, and
press the OK button to select
[ALARM SET]
ALARM
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
RETURN
EXIT :
:
:
:
:
:
:
:
:
:
: [OFF]
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
[
]
[ ]
This submenu allows you to configure the ALARM alert type and duration.This alarm type is used
in conjunction with external alarm input terminals. PIR cameras are offered by LOREX , but are not
included with this system.
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]