13
SG17L7584 - Front - Secondary Function Buttons
SG17L7584 - Front - Secondary Function Buttons
15.
ALRS (ALARM RESET) BUTTON
- To reset an alarm when it is active, press the [FN] button
to activate the secondary functions (note that the LED below the button will turn on), and press
the ALRS button. The alarm will be reset.
16.
PAN / TILT BUTTON
- Press the [FN] button to activate the secondary functions followed by
the [PT Mode] button to activate the Pan/Tilt functions for Channel 1.
NOTE
: Accessory PTZ Camera model SG7380 is required to operate this feature.
17.
IR RECEIVER -
Infrared receiver for optional Remote Control
18.
MIC -
Enable
TWO-WAY
AUDIO
with select
LOREX
cameras
19.
MAIN BUTTON
- Pressing the Main button while in the PIP, Dual PIP or POP mode will change
the camera input of the main screen being displayed.
20.
SUB 1 BUTTON
- Press the
FN
button to activate the secondary function, then press the SUB
1 button. This button is used to select the camera that is displayed in the 1st PIP window.
21.
SUB 2 BUTTON
- Press the
FN
button to activate the secondary function, then press the SUB
2button. When the Dual PIP mode is selected, this button is used to change the camera that is
displayed in the 2nd PIP window.
22.
P-SEQ BUTTON
(PIP SEQUENCE) -
This button is used to sequence the small image or main
image in PIP mode, Press the [FN] button while in PIP mode or POP mode, this function will be
active. To exit PIP sequencing, press this button again.
15
16 17
18 19
20
21 22
Summary of Contents for SG17L7584
Page 48: ...48 Optional Accessories...
