2. Click
EVENTS
. Click the
Warning
tab on the side panel, then click the
Network
tab on the
top panel.
3. Under
Event Type
, select the event type you would like to configure. Check
Enable
to acti-
vate the selected warning.
•
Net Disconnection:
The system has lost connection to the network.
•
IP Conflict:
More than one device on your network has the same IP address.
•
MAC Conflict:
More than one device on your network has the same MAC address.
•
All:
Configure responses for all network events.
4. Configure the following for the selected event type:
•
Show Message:
Check to show a popup message when the selected event occurs.
•
Send Email:
Check to enable email alerts. You must configure email alerts before you
will be able to receive them (see 17.6.3
, page 72).
•
Buzzer:
Check to activate the system buzzer.
5. Click
Apply
to save changes.
17.6.12
Searching Event Logs
Search all channels for events, including motion detection and video loss.
To access the log menu:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
2. Click
EVENTS
, then click the
Event Log
tab on the side panel.
#LX400113; r. 9.0/57191/57191; en-US
81
Summary of Contents for N862 Series
Page 1: ...User Manual N862 Series...
Page 2: ......
Page 3: ...User Manual N862 Series LX400113 r 9 0 57191 57191 en US iii...
Page 119: ......
