III
● Do not aim the lenses at intense radiation source (such as sun, laser, and molten steel) to
avoid damage to thermal detector and visible lens.
● Prevent liquid from flowing into the Camera to avoid damage to the internal components. In
case the liquid entering the Camera, immediately stop using the Camera, cut off the power,
and disconnect all the cables. Then contact the local customer service center.
● Do not stuff foreign materials into the Camera to prevent short circuit which could cause
Camera damage or injury.
● Use the factory default package or material with equal quality to pack the Camera when
transporting the Camera.
● Do not press, vibrate or soak the Camera during transportation, storage and installation.
Operation and Maintenance Requirements
● Do not touch the heat dissipation component of the Camera in case you might get burnt.
● Do not dismantle the Camera; there is no part which can be repaired by users themselves.
It may cause water leakage or bad image for the Camera if it is dismantled
unprofessionally.
● It is recommended to use the Camera together with a lightning arrester, which is to improve
the effect of lightning protection. It needs to conform to the lightning protection regulation
for outdoor application.
● Do not touch the photosensitive Camera with your hands. Use an air blower to clean the
dust on the lens. For further cleaning, pour a little alcohol into a piece of dry cloth with
which you can softly wipe the dirt away.
● Clean Camera body with a piece of soft dry cloth. For any dirt hard to remove, pick up a
piece of clean and soft cloth, dip it with a little neutral detergent and gently wipe the dust
away
—after that, wipe all the liquids on the Camera away with another dry cloth. Never use
any volatile solvent such as alcohol, benzene and thinner, or any cleaner that is strong and
abrasive. Otherwise, the Camera’s surface coating will be hurt and its working performance
will be encumbered.
● Use the accessories regulated by the manufacturer. The Camera should be installed and
maintained by professionals.
● Contact the local dealer or the nearest service center if the Camera fails to work normally.
Do not dismantle or modify the Camera.
