II
Important Safeguards and Warnings
This chapter describes the contents covering proper handling of the Camera, hazard
prevention, and prevention of property damage. Read these contents carefully before using
the Camera, comply with them when using, and keep it well for future reference.
Power Requirements
● All installation and operation should conform to your local electrical safety code.
● Check whether the power supply is correct before operating the Camera.
● The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according to IEC60950-1. Note that the power supply requirement is subject to
the Camera label.
● Install easy-to-use devices for power off before installing wiring, which is for emergent
power off when necessary.
● Prevent the line cord from being trampled or pressed, especially the plug, power socket
and the junction from the Camera.
● Risk of explosion if the battery is replaced by an incorrect type.
● Replacement of a battery with an incorrect type that can defeat a safeguard (for example,
in the case of some lithium battery types).
● Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery
can result in an explosion.
● High or low extreme temperatures that a battery can be subjected to during use, storage or
transportation; and low air pressure at high altitude.
◇
Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas.
◇
A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
Application Environment Requirements
● Use the Camera within the allowed humidity and altitude.
● Do not use the Camera in the strong vibration environment such as in boats and vehicles.
If you still want to use thermal cameras in the two conditions mentioned above, please contact
our sales staff to buy cameras of special model or cameras that are customized. If you use
cameras in improper environments, we shall not take the costs of camera damage.
● There is a default temperature monitoring range of targets for the Camera. Use the Camera
within the range.
● Use the Camera within the required working temperature and humidity.
● Do not place the Camera in the humid, dusty, extremely hot and cold site with strong
electromagnetic radiation or unstable illumination.
● Do not block the ventilation of the Camera to avoid heat accumulation.
● Do not install the Camera near the heat source such as radiator, heater, and stove to avoid
fire.
