26
Using the Main Menu
Confirming Backup
To verify that the file has been properly backed
up:
1. Click
to open Event List.
2. Click
from the Smart Search event
filter.
3. Select the file and click
. The backup
file should begin playing.
4. To exit, right-click or click
until you
return to the main screen.
Backup File Information
Backup files are saved as MOV
files. These
files can be played on the system using Event
List or on your PC using QuickTime™ Player.
See “Event List” on page 13.
Backup files are labeled according to the
following naming convention:
ch_##YYYYMMDDhhmmss.mov:
For more details on viewing backup files, see
“Appendix H: Playing MOV Files” on page 59.
LAN
Configure network settings.
From the Main Menu, click
. The LAN
menu opens.
NOTE:
Some networking knowledge is
required when adjusting options in the LAN
menu.
To configure network settings:
1. Select the following, and use the
scroll-wheel to change values:
• IP
• Mask
• Gateway
• HTTP Port
• QuickTime HTTP Port
2. To save your settings, right-click or click
until you return to the main screen.
3. If you have changed the HTTP or
QuickTime HTTP ports, you should reset
your system by disconnecting and then
reconnecting the power cable from the
rear panel of the system.
NOTE:
For added security, we strongly
recommend changing HTTP port 80 on the
system to
any desired port
not blocked by
your Internet service provider (ISP). For
details on changing ports on your system,
see “Appendix C: Changing Ports On Your
System” on page 49.
Filename
Definition
ch_##
Channel number (1~4)
YYYY
Year
MM
Month
DD
DD
hh
Hour
mm
Minute
ss
Second
Figure 15.0 LAN menu
