24
Using the Main Menu
Motion
Set the motion detection cells and sensitivity
for each camera.
To configure motion detection:
1. From the Alarm menu, click
Motion
Enable
. The text, "Motion" will appear
on-screen when motion is detected on the
respective camera.
2. Choose a camera for motion detection and
select
O
.
3. Click
Motion
. Click the camera you want
to configure motion detection. The motion
grid appears for the selected camera.
4. Click within the grid to enable/disable
individual motion cells. Enabled cells are
light green; disabled cells are clear.
5. Click the
Sensitivity bar
at the bottom of
the screen. Scroll up/down to increase/
decrease the sensitivity for the motion
cells from
0~100
. The higher the number,
the greater the sensitivity.
NOTE:
Sensitivity applies to all cells. If the
Sensitivity bar is not visible, click
.
6. To save your settings, right-click or click
until you return to the main screen.
Figure 13.1 Select the camera for motion detection
• Motion Detection Enabled
• Motion Detection Disabled
Figure 13.2 Select cells and adjust sensitivity
