7
Starting the System
Starting the System
To power the system ON:
• Connect the
power cable
to the DC 12V port on the rear panel of the system
At startup, the system performs a basic system check and runs an initial loading sequence. After
a few moments, the system loads a live display view (
Live Mode
).
NOTE:
Make sure all cameras and cables are properly connected prior to powering on the
system.
On-Screen Display
1.
System Status Bar:
Displays mode, password type, recording mode, language, and status of devices
(HDD and USB).
2.
Display
: Full-screen single channel and Quad split-screen available in Live Viewing and
Playback modes; if cameras are disconnected, channels display a blue screen with the text,
"VLOSS."
3.
HDD Status
: Displays the recording space consumed on the hard disk (%) and the size of
the pre-installed hard drive. For example, 250 GB.
Figure 4.0 Live viewing with on-screen display
2
4
5
6
1
3
