Lorex E893DD Series, Quick Start Manual

Page: 10 / 78

2. Optimizing face and mask detection accuracy
• Install in a bright area and avoid facing direct sunlight with strong backlights and dark shadows.
• Choose a location where objects of interest will be no further than 15ft (4.5m) from the camera.
• Position the camera 10ft (3m) off the ground to detect the full proportion of a face.
• Angle the camera around 15° down from the level position.
• Point the camera directly where objects of interest will be facing.
5
10ft
15° down
15ft
ATTENTION:
Facial recording without consent
is illegal in certain jurisdictions. Lorex Technology does
not assume liability for any use of its product that fails
to conform with local laws.