79
Lorex Auto Port Forwarding Wizard
I have configured DDNS for remote access to my system:
Go to www.lorexddns.net and create a new account
Domain: ____________________________________
User ID: ____________________________________
Password: __________________________________
I have configured my system to connect to the DDNS server:
To enable DDNS on your system:
1. Open Internet Explorer (version 6 or above) and enter the
IP address
of your DVR in the
address bar (i.e. 192.168.xxx.89). DVR Netviewer opens.
2. Log in using your
LAN user ID
and
password
(by default,
ID 9
;
password 3333
).
3. Click the
Setup button
.
The Setup menu opens.
4. Under Network, click
DDNS
.
5. Under DDNS Select, click the drop-down menu and select
http://lorexddns.net
6. In the corresponding text fields, enter your
DDNS username
and
password
.
NOTE:
Obtain this information from the confirmation email after registering for the free Lorex
DDNS service.
7. Under DDNS Domain Name, enter only the
first portion of your DDNS domain
from the
confirmation email. For example, if your domain name is tomsmith.lorexddns.net, you only
need to enter
tomsmith
in the text field.
8. Click
Submit
to save your settings or click
Cancel
to exit without saving.
NOTE:
Once you have saved your DDNS settings, your must reset your DVR in order for the changes to
take effect. Disconnect and reconnect the power cable from the rear panel to reset.
I can access my system from a remote PC:
To access your system remotely:
1. Open Internet Explorer and enter your
DDNS address
from the confirmation email. For
example,
tomsmith.lorexddns.net
2. Log in using your
LAN user ID
and
password
. See table below.
ATTENTION
: You
MUST
enter your DDNS information
LOCALLY
before
attempting remote access.
LEVEL
ID
PASSWORD
GUEST
7
1111
USER
8
2222
ADMIN
9
3333
4/ 8/ 16 Channel
Remote/LAN Viewing
Summary of Contents for LH300 SERIES
Page 129: ......