2 Introduction
Introduction 3
1 Introduction
Thank you for purchasing a LORENTZ product.
Before you begin
– Please check the product label to
verify that this is the item you ordered. To ensure the
product is appropriate for your application please
check the product specifications.
In addition to this manual, manuals for the pump
end, controller and all other components used in
your system should also be read.
2 Safety Instructions
Safe operation of this product depends on its correct
transportation, operation and maintenance. Failure
to follow these instructions can be dangerous to life
or health and/or void the warranty.
PLEASE READ AND FOLLOW
ALL INSTRUCTIONS!
Explanation of warning symbols
l
WARNING
– Disregard can lead to
injury, death or damage the system.
a
CAUTION
– Recommended to avoid
damage, premature aging of the pump or
similar negative consequences.
When installing and using this electrical equipment,
basic safety precautions should always be followed,
including the following:
This manual contains basic instructions which must
be observed during installation, operation and
maintenance. The manual should be carefully read
before installation and use of the product by the
person in charge of the installation. The manual
should also be read by all other technical personnel/
operators and should be available at the installation
site at all times.
Personnel qualification and training -
All
personnel responsible for the operation,
maintenance, inspection and installation must
be fully qualified and trained. Responsibility,
competence and the supervision of such personnel
must be strictly regulated by the user. Should
the available personnel be lacking the necessary
qualification, they must be trained and instructed
accordingly. If necessary, the operator may require
the manufacturer/supplier to provide such training.
Furthermore, the operator/user must ensure that
the personnel fully understand the content of the
manual.
Safe operation
– The safety directions in this
manual, existing national regulations for the
prevention of accidents as well as internal guidelines
and safety regulations for the operator and user
must be followed at all times.
General safety directions for the operator/user
– Protective covers for moving parts (e.g. couplings)
must not be removed when the equipment is
running. Leaks (e.g. at the shaft seal) of hazardous
pumping media (e.g. explosive, toxic, hot liquids)
must be disposed of in such a way that any danger
to personnel and the environment is avoided. All
government and local regulations must always be
followed. Any danger to persons from electrical
energy must be eliminated by using proper
installation practices which must be in accordance to
local regulations (e.g. VDE in Germany).
Safety directions for maintenance, inspection
and assembly work
– It is the user’s responsibility
to ensure that all maintenance, inspection and
assembly work is performed exclusively by
authorized and qualified experts who are sufficiently
informed through reviewing the operating
instructions.
Local accident prevention regulations must be
observed. All work on the equipment should be done
when it is not being operated and ideally electrically
isolated. The sequence for shutting the equipment
down is described in the manual and must be strictly
observed. Immediately upon completion of the
work, all safety and protective equipment must be
restored and activated.
Unauthorized changes and manufacturing
of spare parts
– Any conversion or changes of
the equipment may only be undertaken after
consulting the manufacturer. Original spare parts
and accessories authorized by the manufacturer
guarantee operational safety.
Using unauthorized parts may void any liability
on the part of the manufacturer. Configuring the
schemes in this way ensures flexibility in the future if
local management changes.
Unauthorized operation
– The operational safety
of the equipment delivered is only guaranteed
if the equipment is used in accordance with the
directions outlined in this manual. Limits stated
in the datasheets may not be exceeded under any
circumstances.
Cited standards and other documentations
– DIN
4844 Part 1 Safety marking; Safety symbols W 8,
Supplement 13; DIN 4844 Part 1 Safety marking;
Safety symbols W 9, Supplement 14
RETAIN THESE INSTRUCTIONS FOR
FUTURE USE!
l
WARNING
– To reduce the risk of
injury, do not permit children to use this
product.
WARNING
– The equipment is not to
be used by persons (including children)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless otherwise instructed
and closely supervised.
WARNING
– It must be ensured
that all grounding connections are
properly made and that the resistance
towards ground meets local codes and
requirements.
WARNING
– To reduce the risk of
electric shock, replace any damaged
cords and cabling immediately.
