SOMMAIRE
LOREME
12, rue des Potiers d'Etain - 57071 Metz
03.87.76.32.51 - Fax 03.87.76.32.52 - Email: [email protected] - [email protected]
E 10
4-20mA signal isolator, signal splitter with 2,3,4 outputs
SIL2 / SIL3
CAL4/100ig CAL4/100igM
DECLARATION
OF CONFORMITY
REV1
Page 1/1
The LOREME society declare under its sole responsibility, that the following product :
Designation:
Isolator 4-20mA current loop splitter
Type:
CAL4-100ig
Revision : 4
date : 07/04/2011
Can be used for functional safety application up to SIL3 according to standard : IEC61508-2 : 2000
respecting the safety instructions specified in the safety manual.
The assessment of the safety critical and dangerous random failure give the following values:
Device with type A components, hardware fault tolerance HFT = 0
(1)
according to AMDEC CAL4-100ig rev4
created with "ALD MTBF calculator" : http://www.aldservice.com/
Standard : CEI 62380 2004-08
(2)
FIT = Failure rate (1/h)
Metz, the :
18/01/2016
Signed on behalf of LOREME; M. Dominique Curulla
λf
λ dangerous
undetected
= PFH
SFF (1)
DC
PFD
avg
T
[Proof]
= 1 an
PFH
265 FIT
(2)
@30°C
305 FIT
(2)
@45°C
1.5 FIT
(2)
@30°C
1.8 FIT
(2)
@45°C
99.4 %
88.8%@30°C
85.0%@45°C
6.57E
-06
@30°C
7.88E
-06
@45°C
1.53E
-09
1/h@30°C
1.8E
-09
1/h@45°C