Lorelli MARCEL, Manual Instruction

Page: 5 / 32

ASSEMBLY OF THE HIGH CHAIR
FOLDING OF THE HIGH CHAIR
USING OF THE SEAT BELT
Warning: To avoid serious injuries always use seat belt !
The harness comes part fitted to the seat . Adjust the length of the belts with sliders „А“ Picture 10. To
lock the safety belt insert the plastic elements (1) into the central buckle . To unlock the safety belt ,
press both plastic elements „ B” and pull them out ( 2 ).
PARTS
Warning: Always release the locking hook !
For safety of the child when is in the seat use the seat belt . This high chair can only be used with
feeding tray in place . It is necessary to use seat belt , when the child is in the seat .
Position 1 - Seat frame, seat and harness
Position 3 - Tray / 1 pc. /
Picture 1
Position 2 - Front and Rear legs with Toy basket
Push the button „А“ Picture 2 and insert the pipe „B”.Installation is successfully completed when the
spring leaf extend out.
Pull the locking lever between the legs upwards ( Picture 3 ) and open the legs.
UNFOLDING
ASSEMBLING OF THE PIPES
Damages of the chair mechanism due to incorrect usage are not subjects of the warranty.
INSTALLATION OF THE FRONT AND REAR LEGS
Insert front pipe into the backrest tube „А“ and rear pipe into the supporting lever of dining plate „В“ at
the same time as shown on Picture 4. Installation is successfully completed when the spring leaf
extend out.
(during assembly, note that the distance between the tubes in the upper part of the front
legs is narrower than that of the rear).
INSTALLATION OF THE DINING PLATE
Place the pipe on the tray into the plastic console of the backrest. Picture 5 Installation is successfully
completed when the spring leaf extend out. Open the seat frame fully and press the tray down firmly
to fasten the clips to the tube underneath Picture 6 . The dining plate is locked when you hear “click”
sound. F tic tac button „ B “. Now the feeding chair is ready for use . asten the
After using, r tic tac button „ B “ , Picture 6. R clip “ A” under elease the underneath the tray elease the
the tray. Picture 6 L . Pull the locking lever between ift the tray firmly to release the clips from the tube
the legs upwards ( Picture 8 ) , fold the legs together and turn the tray over the back Picture 9.
5