MONITOR DISPLAY
NOTE:
The monitor will not function without a CR2032 battery installed.
BATTERY REPLACEMENT
1. Take out the post and remove the knob from the main frame. Remove the five screws as
shown in above figure to make the monitor apart from the frame by gently pulling the monitor
out of the frame.
2. Turn over the monitor to expose the battery compartment. Take out the old battery and
insert a new one.
3. Turn the monitor back over and gently slide the monitor back onto the frame. Ensure that
the monitor is locked in place. Ensure the computer wires from the frame and monitor are
connected. Tighten the five screws.
DISPLAY BUTTOM:
To use simply start pedaling and the monitor will display your TIME/
SPEED/ DISTANCE/ CALORIES.
TIME:
This function displays the duration of your workout.
SPEED:
Displays your workout speed.
DISTANCE:
Displays the distance you have traveled during your workout.
CALORIES:
Displays the calories you have burned during your workout.
