Page 8 of 27
Step 10
With the Top Panel (A) laying on a
non-abrasive surface, insert 8 each Cam
Screws (1).
With the desk frame standing in its
upright position, place the Top Panel (A)
on the unit so that the Cam Screws (1)
engage with the Cam Locks (2). Using
a Phillips Screw Driver, rotate the cam
locks 1/2 clockwise turn until snug. DO
NOT OVERTIGHTEN.
Step 11
Attach the Full Extension Slide (15) to the
2 each File Drawer Side Panel (I) with 6
each 4X10 Screw (10).
Install the Lock Plate (8) on the left side
File Drawer Side Panel (I) with 2 each
4X10 Screws (10).
Step 12
Install the File Drawer Front and Back
Panel (J) by sliding the Drawer Bottom
Panel (N) into the groove on the bottom.
Using a Phillips Screw Driver, attach the
left and right side File Drawer Side Panel
(I) with 12 each 4x40 Screw (5). Make
sure that you have properly placed the
Drawer Bottom Panel (N) in the groove
provided.
Attach the File Drawer Face Panel (H) to
the front of the unit using 2 each 6X21
Bolt (12) and 2 each Washer (13) with a
Phillips Screw Driver.
LLR44311_F.indd 8
LLR44311_F.indd 8
3/4/11 12:51 PM
3/4/11 12:51 PM
