Page 5 of 27
Step 3
Install the Middle Side Panel (E) onto the
Back Panel (D) as shown so that the Cam
Screws (1) engage with the Cam Locks
(2). With a Phillips Screw Driver rotate
the cam lock 1/2 turn clockwise until
snug. DO NOT OVER TIGHTEN.
Step 4
I
nsert 4 each Cam Lock (2) in the holes
shown on the Fixed Shelf Panel (F).
When inserting the cam lock make sure
that the arrow is facing toward the cam
screw entry.
On the Support Panel (G) insert 4 each
Wood Dowel (6) in the position shown.
Tap lightly into place using a Rubber
Mallet or Hammer.
Step 5
Install the Fixed Shelf Panel (F) onto
the Middle Side Panel (E) so that the
2 each Cam Screws (1) located on the
Middle Side Panel (E) engage with the
Cam Locks (2) located on the Fixed Shelf
Panel (F). Using a Phillips Screw Driver
rotate the cam locks 1/2 turn clockwise
until snug. DO NOT OVER TIGHTEN.
Install the Support Panel (G) so that the
Wood Dowels (6) fit in securely in holes
provided in the Middle Side Panel (E).
LLR44311_F.indd 5
LLR44311_F.indd 5
3/4/11 12:51 PM
3/4/11 12:51 PM
