7.
AM reception
: the receiver has a built-in AM bar antenna. If reception is weak,
slightly rotate or reposition the unit to improve AM reception.
8.
FM reception
: the receiver has a built-in FM wire antenna hanging at the rear
cabinet. For best reception, completely unravel and extend this wire.
9.
When you have finished listening to the radio, turn the volume knob in a
counterclockwise direction to switch the unit off. Unplug it from the power supply if
you are not going to use it for a while.
FM and FM-stereo
FM-Stereo:
receiving stereo programs. Once a stereo signal is received, the ST icon
will light up on the display.
Phono Operation
1.
Open the dust cover and turn the volume knob clockwise to turn the equipment on.
2.
Use the function selector to select PHONO mode.
3.
Set the speed selector to the appropriate position: 33, 45 or 78, depending on the
record to be played.
4.
Set the auto stop control to ON if you want the turntable to stop turning when it has
reached the end of the record. If the switch is set to OFF, the turntable will continue
turning at the end of the record.
5.
Place the record on the turntable (use the 45 rpm adaptor, if required).
6.
Move the lift lever towards the back to raise the tone arm from the arm park, then
slowly move the arm to the record, as illustrated on the right. The turntable will start
rotating.
7.
Move the lift lever towards the front, the tone arm will gently drop onto the record
and playback will start.
8.
To stop playback, move the lift lever towards the back to raise the tone arm. The
turntable will still be rotating but the record will stop playing. To continue playback,
move the lift lever towards the front.
9.
To play a different piece on the record, move the lift lever towards the back, move the
raised tone arm to the start of the piece and then move the lift lever towards the front to
lower the tone arm and start playback.
10.
To adjust the volume level, turn the volume knob to the right or left.
7
