AUX IN encoding
1.
Use the function selector to select PHONO/AUX mode and then insert a memory
device (USB drive, SD or MMC card).
2.
Press the record
REC button, it will take 3 - 4 seconds to read the memory
device, then the USB or SD icon will be flashing on the LC display.
3.
Press the skip up
or skip down
button to select the desired mode (USB
or SD) for encoding, then press the record
REC button again to confirm.
(You can skip this step if only a USB drive or an SD/MMC card is inserted.)
4.
The system will start the encoding mode after a few seconds. During encoding, the
USB or SD icon will be flashing on the display.
5.
To finish encoding, press the stop
button. The display will show “END” and return
to PHONO/AUX mode.
NOTE
:
The recording speed is 1:1. Recording will take as long as playing the CD (or other
auxiliary input).
The recording format is preset at MP3 bit rate 128 kbps.
17
