manualshive.com logo in svg

Looperlative LP1 Gen B, User Manual, Page: 5 / 29

Share
Download
Looperlative LP1 Gen B User Manual Download Page 5

Back Panel 

 

1.

 

Power 

accepts the connector from the adapter supplied with the LP1. The LP1 requires a 9 

VDC power supply capable of supplying at least 1A of power. 

2.

 

Network 

is used to connect a standard Ethernet cable. The LP1 GenB does not require cross-

over cables because it autodetects cable connection type. By default, the LP1 is configured to 
automatically obtain its network configuration from a DHCP server or use an auto IP address if 
there is no DHCP server on the network.  Auto IP allows connecting an LP1 directly to a 
computer Ethernet port without an additional router.  The computer must support auto IP 
configuration.  For DHCP, the LP1 must be connected to a network with a DHCP server.  This 
is often your home router. You may instead manually configure the IP address, gateway 
address, DNS server address, and netmask.  All of these must have a value other than 
000.000.000.000 otherwise the LP1 will attempt automatic configuration.  Manual 
configuration is described in “Network configuration”. 

3.

 

MIDI in

 is used to provide MIDI control and clock to the LP1. 

4.

 

MIDI through

 sends back out everything received on MIDI in. 

5.

 

MIDI out

 is used to send MIDI clock out to another device. 

6.

 

Audio In 

is two ¼ inch unbalanced audio connectors that accept line level inputs. 

7.

 

Audio Out 

is two ¼ inch unbalanced audio connectors that are the main outputs. 

8.

 

Aux 1 Out 

is two ¼ inch unbalanced audio connectors that are the aux 1 outputs. 

Getting Started 

 

Quick Start 

 

⚫

 

Unpack the LP1 from shipping carton.  Please save shipping carton. 

⚫

 

Mount the LP1 in an empty space in your rack.  The LP1 is not designed for desktop use.  Please 
properly mount your LP1 in a rack case or floor-standing rack. 

⚫

 

Connect the audio source to the audio inputs on the rear panel.  The LP1 accepts unbalanced tip-ring 
1/4” connectors.  The audio inputs accept line levels or in some cases instrument levels.  Never 
connect an audio source that exceeds 5V peak-to-peak. 

⚫

 

Connect the audio outputs to line-level inputs on your amplifier, mixing console, or other effects 
boxes.   

⚫

 

If you are using a remote MIDI controller, attach it with a MIDI cable to the MIDI input connector 
on the back of the LP1. 

⚫

 

Plug the cable of the supplied power adapter into the power connector on the back of the LP1.  The 
LP1 requires 9VDC 1A power. 

⚫

 

Plug the power adapter into an appropriate power outlet. 

Summary of Contents for LP1 Gen B






























Reviews:

No comments