manualshive.com logo in svg

Looperlative LP1 Gen B, User Manual, Page: 22 / 29

Share
Download
Looperlative LP1 Gen B User Manual Download Page 22

 

⚫

 

Press the MENU button until the main menu is selected.  The main menu says “Looperlative LP1” 
on the top line of the display. 

⚫

 

Turn the knob until the second line of the display reads “MIDI/USER btn.” 

⚫

 

Press ENTER. 

⚫

 

The display will read “Press button.” 

⚫

 

Press the USER 4 button. 

⚫

 

The first line will now read, “USER 4 : 1”. 

⚫

 

Turn the knob until the second line reads, “Reverse Track.” 

⚫

 

Press the track 2 button. 

⚫

 

The first line will now read, “USER 4 : 2”. 

⚫

 

Turn the knob until the second line reads, “Half Speed Tr.” 

⚫

 

Press the track 3 button. 

⚫

 

Turn the knob until the second line reads, “end sequence.” 

⚫

 

Press ENTER to accept the selection. 

 

Network configuration 

 

By default, the LP1 attempts to automatically obtain its network configuration from a DHCP server 
which is normally a function provided by your network router.  If you wish to directly connect the LP1 
to a computer then it becomes necessary to manually configure the LP1 network parameters. 
 
All of the network parameters are assigned from the the main menu.  These parameters are: 
 

IP Address 

This is the IP address that the LP1 will respond to.  If you are 
creating a link from an LP1 to a computer, then the recommended 
value for this parameter is 192.168.99.2. 

Gateway Addr 

This is the address of your network router.  If there is no router, 
then it is recommended that you assign the value of your computers 
IP address to this.  For an LP1 directly connected to a computer, the 
recommended value is 192.168.99.1. 

Netmask 

This is the network mask for your network.  For most small 
networks, the value of 255.255.255.0 is appropriate.  This value 
must match the network mask assigned to the other devices on your 
network. 

DNS Server 

This is the address of the domain name server (DNS) on your 
network.  If you don't have one, then assign your computers address 
to this value.  This parameter is only used if you use the “Upgrade” 
option from the main menu.  Upgrade needs the DNS server to 
locate the Looperlative upgrade server. 

 
 

Assignable Functions 

 

Summary of Contents for LP1 Gen B






























Reviews:

No comments